Drilling into Concrete Without a Hammer Drill – Alternative Way

Drilling with hammer drills would do your work seamlessly, but what to do if you don’t have a hammer drill?

Concrete, which is a mixture, where sand and gravels contributes 60%, is tough to be holed by a hammer drill.

While hammer drill works perfectly to construct holes in blocks of concrete or drill into any solid material, there is always an alternative solution that is convenient and simple to use.

Even though it will take longer than the hammer drill, the job will be done accurately. That is all we want!

To know precisely how this works, go through the following information and accomplish your drilling goal in no time.

Working of masonry drill bits

With the narrow possibility of dangers, these masonry drill bits are developed using strong tungsten carbide, making them ideal for concrete walls, and reinforced concrete.

They drill into concrete while building a hole due to the circumference of the masonry or concrete drill bits, which is broad in shape and is developed of heavy-duty tungsten carbide.

Is it possible to drill into concrete without a hammer drill?

Yes, it is considerably manageable to work without a hammer drill. With the help of a typical drill machine, masonry or concrete drill bits, and nails, you can drill into concrete without hammer drill.

Moreover, this piece of work needs your full attention because a standard drill gets a masonry drill bit out of place if not given whole concentration and can lead to significant accidents, or your work can get compromised. So, observation is required with this solution.

Recommended Tips to follow

>The crucial and foremost point that one should note is that there are no electrical wires, sewage pipes, or any kind of object in the internal part of the wall where you are going to drill the hole. Therefore, you don’t end up having a mishap or a new problem.

>As we are drilling with a regular drill machine, it is significant that you are not under pressure, which means you should have ample time because this will take longer than you can imagine. It will help you to rest or take some breaks in between.

>The necessary thing to keep in mind while drilling with a regular drill machine is that you have different sized masonry drill bits. It is because you might need to change them frequently according to the hole.

>While concrete drilling, make sure you bring out the masonry drill bit repeatedly from the hole because the mess a concrete wall creates can divert your drill bit to the wrong side.

>You should be aware of the concrete’s age because recently manufactured walls can be easily drilled in contrast to older walls that are primarily impenetrable, and that makes your job arduous.

>Don’t use a regular drill machine to drill concrete for an extended period; it will get piping hot as it’s not made for this purpose, and secondly, an electric shock has a possibility in this situation.

>Keep your strength to yourself only because if you did the opposite, you can cause damage to the wall, masonry drill bit, and even to yourself.

>While concrete drilling, if there is a tricky point where you can’t get through (e.g. stone obstacles), use a big nail to break that hard stuff into splinters.

>Know all the safety precautions used while drilling. Wearing gloves are recommending because drill bits also get hot. You should wear a mask too because the regular drilling machine is a nuisance and splash a lot of dirt on you.

Step by Step Guide

Firstly, check all the tips and completely understand them, then start this process. We’re going to drill concrete without a hammer drill.

Trace the spot where the hole is going to be drilled

Using a pencil or pen, mark an exact point on the concrete surface where the drilling has to be done so that you don’t make any mistakes or harm to the wall. Also, know deep you have to drill into concrete with the masonry drill bits.

If you don’t know how to measure the hole’s depth, use this hack: measure the height of the nail and the masonry drill bit, then you have to mark it on the drill bit with a marker or use tape for easy removal.

Prepare and use minor drill bits first

In this step, be extremely careful with the regular drill so that it does not run away from your hands.

With these tiny bits, you will get a perspective of where to drill first exactly, and even if you make a mistake with small bits, it will not matter much.

Although this will take ample time, at least, you will be continuing on the right path.

After you are done with making a guide hole, use big drill bits

When you dig enough with small bits, swap them with larger bits.

Then, again be gentle and attentive while drilling with these since they can also divert the drill bit to the wrong way.

Also, always keep an eye on the pace and energy you are putting on the machine.

Hindrances are normal while drilling into concrete

There will be particles of concrete that will be very hard and not enough to break with the bits.

Use some nails and a hammer to break them into pieces to clear your way in.

Additionally, don’t hammer to break the wall too much because it can cause damage.

Have some cold water with you all the time

While working on the regular drill to drill concrete, the bits and machine can get boiling which can hurt you if you plan to change the masonry bit in between.

For this issue, use some cold water on the bits to cool them down and for the machine, just rest it for a while and then continue. This will rest the motor and prevents the motor from burning out.


To sum this all up, substitutes are great for one-time work but don’t use a regular drill repeatedly. The reason is apparent that they are pressured by the work they are not supposed to do in the first place.

If you tried this, you might get an idea that this is way more difficult than working with the actual tools. It’s best to use the right tools to buy superior quality products to don’t waste your money and complete the work faster.

Leave a Comment